See the savings of a DURMETAL® Kit in your industry! Ask us for a quote for your DURMETAL® Repair Kit!
|
||
Live Repair (Video) | ||
Only a few examples of our collection of customer testimonials |
|
Refineries - Oil and Gas - Offshore Companies |
|
«Patched a large hole in a dividing baffle plate with DURMETAL®
on a 3 metre diameter channel head. The channel head baffles
are carbon steel with a lead lining. This operates with a constant
flow of salt water on an exchanger. The lining had become very
thin and salt water had holed the baffle plate. By using
DURMETAL® Coldwelding Kit it saved valuable downtime and
man-hours. It is a marvellous product.» |
«Repaired a 2’’ line that came off a 16’’ line that supplies the power
plant. In order to weld, we would have had to shut down the main
line, break 2 flanges and flush the line with foam resulting in at
least 15 hours downtime and a cost of $ 3000.– to $ 5000.–. You
have a good product.» |
«This is a gas engine cylinder that I repaired with the DURMETAL®
Kit purchased. About $ 300.– was saved in money and downtime
saved was 8 days.» |
«Repair on leaking tank.» |
«Repair was made on a diesel engine turbo charger which seems
to do the job so far.» |
«Repair carried out with DURMETAL® Coldwelding to the leaky
cooler-header of the air-cooler, Nuovo-Pignone (Italy) compressor
unit, in operation at one of our Natural Gas Compressor Stations.
The cooler header is about 12 feet above the ground level. To
dismantle and refit it through conventional welding process, after
repairing, would have taken us more than 5 man-days and
approx. 24 hours shut down. With DURMETAL® shut down was
only 5 hours.» |
«Enclosed is a picture of a repair job done on a pallet toter gear
box. A steel wheel had come loose on its shaft and wore a
circular groove in a cast gear box. The groove was deep enough
to let the oil leak out of the gear box. To repair this in the
conventional way, by arc welding, the gear case would have
been removed and then welded. By using DURMETAL® Coldweld
method, we completed this job in one hour and did not have to
remove the gear case. Quite a savings!» |
«We have used the DURMETAL® Coldwelding System® to repair
an oil leak on the flange of one of our oil pumps of a 20 KVA
transformer. By pulling 8 pounds of vacuum we were able to stop
the leak after three applications. Without this, the transformer
would have had to be taken out of service and the oil removed.
Repair and vacuum filling would have taken approx. 40 hours of
labor for a three man crew. Downtime would have been approx.
1 week.» |
«Repair on storage tanks in oil tank farm.» |
«Repair job with DURMETAL® Coldwelding System® on flanges
and couplings.» |
«Repairs made on a 2000 BBL crude oil tank and a 500 BBL oil tank that was leaking due to internal corrosion. Metal screws were inserted to stop the flow and DURMETAL® Standard was applied. Both leaks were stopped with no loss of production.» |